+91 9819304488 devtechindia@devtechindia.com
+8 (8/10) to 400/500 Mesh as per ASTME E-11
Medium Blocky with irregular shapes, having sharp cutting shapes
Low - Toughness index, easily friable
Stable up to 1100 C and periodically to 1250 C Stable to low Thermal Shocks.
Drilling & Grinding of Glass Ceramics, Hard Alloys, Recommended for Electro - Plating Tools & Dental tools.
+8 to 400/500 Mesh as per ASTM E-11
Total Blocky shapes with good cutting edges
Medium Toughness, not easily friable
Thermally stable up to 1100 C and periodically up to 1250 C stable to medium thermal shocks.
Drilling, Grinding & Sawing of Glass- Ceramics, Hard Alloys, Dental Tools & Sintering Tools.
14/16 Mesh size to 40/50 Mesh size available
Original Crystal in cubes octahedral - decahedral
White, Off white, ligh colour
Varies and depends on inclusion
Die - Making- Dressing, Jewellery moulds & ornaments.
14/16 Mesh to 40/50 Mesh size available
Original Crystal in cubes octahedral - decahedral
Dark Brown, Blacking having nats
Varies and depends on inclusion
Die - Making- Dressing, Jewellery moulds & ornaments.
+8 to 18/20 mesh or in SPC/CPS counts
Irregular with sharp edges and angles with sharp corners, opaque, dark brown to black
Good
+18 to 18/20 Mesh size or in SPC / CPS counts
Blocky to irregular in shapes with multi tiny crystals with 'Emery' look
High toughness index
Low Thermal stability
High abrasive due to rough surface, Gridding, Polishing, Segments in Dressing & Drill Bits.
0 - 0.25 Micron to 60 - 80 micron size available
Very fine particles in blocky shapes with sharp edges
High toughness index
Stable up to 1100 C, It absorbs high thermal shocks.
Fine Size - For polishing ultra hard material, Medium Size - For rough polishing ultra hard material, Coarse Size - For grinding ultra hard material.
All Rights Reserved By Dev Tech (India) Pvt. Ltd
Designed By Mirackle Solutions